Do any of you know where I can lay my hands on the channel display for a DAK Mark X radio? Thanks! More to come on this one as I get it working again.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!
DAK Mark X Channel Display Source Needed
- Thread starter DTB Radio
- Start date
That's a much-larger than average display. Finding a 2-digit display that's an exact match for the pin-hookup pattern is probably a long shot. If you end using a pair of single digits that are not an exact replacement you'll end up using a piece of perforated board to mount the new ones. Each wire will have to be correlated to the correct pin on each new digit. It's laborious, but doable. Pretty sure they are common-anode digits.
73
73
I kinda doubted there'd be an exact match out there anymore, and I'm certainly open to "fudging", lol! Thanks for the reply!
- No one is chatting at the moment.
-
-
-
-
@ Geoexplorer69:Coax question. I just put up a new Sirio monsoon base antenna with 100’ of rg8u coax testing with myMFJ antenna analyzer shows 1.4 swr at 26.965mhz and a 1.1 at 27.405 mhz . When I checked the ohms it’s steady a 30 ohms across the entire bandwidth.
-
