Good luck with it. I mean that. Noise issues are a real PITA to deal with especially in a mobile environment.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!
Filters
- Thread starter Montana Bauman
- Start date
Good luck with it. I mean that. Noise issues are a real PITA to deal with especially in a mobile environment.
Nothing earth shattering here, just the same old way of doing it...
Find the source of the noise and 'cure' it at the source. Typically that means adding a 'filter' (capacitor to ground or inductor in-line). The 'other' way of doing it by shielding. Wrap the noise maker in foil! Yeah, right. Or just stay as far from that noise maker as possible. 'Nuther, yeah right.
A very large hammer almost always works too...
Find the source of the noise and 'cure' it at the source. Typically that means adding a 'filter' (capacitor to ground or inductor in-line). The 'other' way of doing it by shielding. Wrap the noise maker in foil! Yeah, right. Or just stay as far from that noise maker as possible. 'Nuther, yeah right.
A very large hammer almost always works too...
- No one is chatting at the moment.
-
-
-
@ Geoexplorer69:Coax question. I just put up a new Sirio monsoon base antenna with 100’ of rg8u coax testing with myMFJ antenna analyzer shows 1.4 swr at 26.965mhz and a 1.1 at 27.405 mhz . When I checked the ohms it’s steady a 30 ohms across the entire bandwidth.
-
-
