For Sale JD200 Poweredge 6800 server power supply,

[cbkidd1]

I am selling my JD200 PowerEdge 6800 The only things I have done is add an on/off switch and Adjustable fan speed control I used all new parts. As you may know, you can add a pod for adjustable voltage anywhere from 12.5 to 15 volts. I will include a new pod if you wish to do so. Also, you can get anywhere from 91.7 amps to 130.8 amps output. You can get all the mods from Rc Groups.com I did leave the wires for positive and negative hooked up. This is a great looking and working power supply. I only used it for a very short time. asking $85.00 Shipped with tracking info. PayPal gift for Payment. 73,

 

[cbkidd1]

It also comes with a power cord.

 

[cbkidd1]

$80.00 Shipped not $85.00

 

[cbkidd1]

$75.00 Shipped,

 

[ButtFuzz]

So the 'back' of the power supply... is that where you soldered the power cord? Into the socket made to accept a standard business machine power cable? Or am I seeing things back-azzwards?

 

[cbkidd1]

Hi ButtFuzz,
I think you are looking at it backward, The front is where the two green and yellow lights are with the fan control and on and off switch. I took the front picture with the power on to show the green lights were lite. If the yellow light was lite that would indicate a short or something wrong with the power supply. I used the flash witch made the green lights look like there were off but infact they are both on. The supply has all kinds of safety features built-in. The brown wires are for the power leads + and - I am buying a Yaesu ft-1000MP Mark v transceiver and know longer need the power supply. 73,

 

[cbkidd1]

Bump $70.00 Shipped,

 

[2NC995]

That’s a lot of power for $70!!!

 

[ExitThirteen]

CBKidd,

I'll snag it from ya! PM me please.



~Cheers~

 

[wavrider]

Hey KIDD you going to enjoy that FT1000MP mkV
I am using one here but I do put a fan blowing on the fins, helps keep it cooler.
so many features in that rig take a month of reading the manual get used to all the functions.

 

[cbkidd1]

Power Supply has been sold to ExitThirteen, Wavrider Now it's time for me to get my ham license after putting it off for all these years. Even though I can say I have never talked on ham bands on any of the Transceivers I have owned. With some of the help from the guys here on the forum, I can buy the FT-1000MP Mark v 73,

 

[wavrider]

KIDD just apply yourself and you will get there.
it is a lot of fun, and some disappointment as well
but overall well worth the effort to get the privilege's of working the hf bands

 

[ExitThirteen]

CBKidd,

I sent you a PM!


~Cheers~