• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Forum HF contest 16-17 May.

That freq is do able, top of the band, my VSWR is a little high there as I am cut for the bottom but the tuner will take care of that problem.
 
Working straight through until the 21st:(

Will try to get on the bands after work and early mornings.
 
  • Like
Reactions: binrat
4x multiplier for QRP. For this contest QRP is 10 watts or less.

The above will qualify for any contacts made with me. I have a power amp but I don't run it because the neighbors all have old equipment and my transmissions cause them to freak out a bit. Plus the wife is on vacation and she is keeping me busy running and visiting and doing all of the things she doesn't have time for during the work week.
I will be on and off the air so it will be catch as catch can.
 
Last edited:
  • Like
Reactions: binrat
Does anybody have a template for putting the contact information in a format that can just be copy/pasted in to the contest data? That would eliminate extra key punching.
 
Does anybody have a template for putting the contact information in a format that can just be copy/pasted in to the contest data? That would eliminate extra key punching.

I am lucky to get just a few contacts in the last couple of contacts. Sure did not take much time to put the contacts on the forum.

Word or notepad can be copied and pasted.
 
Sure did not take much time to put the contacts on the forum.
Word or notepad can be copied and pasted.

Okay, I understand. I was hoping for a spreadsheet format with the columns named for "Call Sign", "UTC time", "Signal Strength" and "Frequency". If there was a standard format it would be very easy for the judges to just import the data.
 


Write your reply...
dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    NOTICE: The Midwest 6 Meter DX Group will be set up at Hamvention in Xenia...BOOTHS 9107-9111...COME SAY HELLO!
    +1
  • @ W4KVW:
    I mete KZ4RR there is 2013 for the 1st time & we live about 50 miles apart & had talked for many years. Traveled halfway across the country so we could finally meet. LOL W4KVW EM80wg
    +1
  • @ BJ radionut:
    Lee/KZ4RR will be thr at XENIA this year again...will be great to see him...We work almost every morning on 6m SSB
    +1
  • @ W4KVW:
    I will not be there but hopefully by the end of this month I will have my New tower and antennas back in the air including my M2 6M5X. The old tower and all of my antennas came down in October 2023 during a Hurricane.
    +1


      You do not have the permission to use the chat.