I have a Galaxy DX929 AM radio.
There is good receive Audio and good tx and rx.
There is no mic audio and no pa audio.
If i key radio about 3 watts and turn on a radio next to i can not hear any audio when I keyup.
If i turn on the echo and then key up I can just faintly hear the mic audio with echo.
I used an audio tracer and on the in of the mic connector good audio coming from the mic. Also tried 3 different mics same problem.
Someone I think added the audio board and the pot control out front and then on the other side sandwiched between the front panel looks like a hassle to take apart and check on that area. There is the big echo board attached to the side chassis.
I dont have a good service manual to trace out the audio from the mic connector then through the echoboard in and out.
Would anyone have an Idea where to look of have a service manual for this dx929.
thanks
There is good receive Audio and good tx and rx.
There is no mic audio and no pa audio.
If i key radio about 3 watts and turn on a radio next to i can not hear any audio when I keyup.
If i turn on the echo and then key up I can just faintly hear the mic audio with echo.
I used an audio tracer and on the in of the mic connector good audio coming from the mic. Also tried 3 different mics same problem.
Someone I think added the audio board and the pot control out front and then on the other side sandwiched between the front panel looks like a hassle to take apart and check on that area. There is the big echo board attached to the side chassis.
I dont have a good service manual to trace out the audio from the mic connector then through the echoboard in and out.
Would anyone have an Idea where to look of have a service manual for this dx929.
thanks