Wanting to change the roger beep in my HR 2510 to a long and loud beep. I really like to stand out while on AM and I think having a really loud and long roger beep will do that lol.
Roger Beep Mods (via CBtricks.com)
The Roger Beep in the HR2510 is ‘Unique’ but kind of wimpy..To modify this, locate R96 (a 2.7 Meg. ohm resistor) Remove and replace with a 100K ohm 1/8 watt resistor. This will increase the amplitude of the beep.
To change the duration (length) of the beep, replace C110 (10uf 16v ) remove and replace with a capacitor at least 50v with more or less capacitance to lengthen or shorten the beep to your preference.
These components are located to the left (facing the front of the radio) of IC 104.
Any ideas on a value resistor to replace to make the beep super loud?
Any ideas on the increasing the length of the roger beep? The stock 10uf 16v makes the beep last less than 1/2 a second.
I would like to have at least a few seconds of roger beep.
I have a few junk radios laying around I may be able to pull the parts out of. There is also a radio shack close by.
Roger Beep Mods (via CBtricks.com)
The Roger Beep in the HR2510 is ‘Unique’ but kind of wimpy..To modify this, locate R96 (a 2.7 Meg. ohm resistor) Remove and replace with a 100K ohm 1/8 watt resistor. This will increase the amplitude of the beep.
To change the duration (length) of the beep, replace C110 (10uf 16v ) remove and replace with a capacitor at least 50v with more or less capacitance to lengthen or shorten the beep to your preference.
These components are located to the left (facing the front of the radio) of IC 104.
Any ideas on a value resistor to replace to make the beep super loud?
Any ideas on the increasing the length of the roger beep? The stock 10uf 16v makes the beep last less than 1/2 a second.
I would like to have at least a few seconds of roger beep.
I have a few junk radios laying around I may be able to pull the parts out of. There is also a radio shack close by.