Let's recap a few things about lightning and your station:
1) Its strikes where the largest potential voltage between the largest Earth ('ground field') voltage exists and where the largest voltage in the storm cell occurs - overcoming even great surface resistance to discharge - to the least path of resistance. Trees, houses, antennas, and occasionally people too. Nothing is exempt. Yup-yup.
2) It is best to have an low impedance flow to lightning already in place. This is where the lightning would flow anyway. All you are doing is providing a path that has the least possible resistance so that it will flow there, and not into your house. The lightning ground should be outside the building. It should be put together well enough to endure many future strikes and not break down.
3) It isn't an expensive project. Probably less than $200 for the homeowner. But it needs to be done correctly to be effective.
4) if the strike takes a path of higher resistance (tree, barn, or your coax); then these items will heat up, burn, or even explode.
5) Remember 'Murphy's Law'? If you live in an area prone for lightning strikes; then your home may well get struck eventually. If you have a ground system in place and it isn't done correctly; then the lightning will find the least path of resistance for you.
Here is a FAQ:
Lightning protection for your home