LMR 400 vs standard RG8X

[Shadetree Mechanic]

I need a 75' length of cable w/ PL259's. 2/3 of it will be an outside vertical run. HF only. I've been using cheap RG8 from decades ago that was stored.
What is JEFA?
I was set to shop for LMR400 when I found "LMR400/213 type" ads for a BR400 cable. Terminology is getting tricky.

All of the cable in my shack is from Jefa. Their cables are assembled on site in Maryland and carry a warranty against defects. Their 400 cable is used by several government agencies.

This is not rebranded crap coax.

JEFA Tech Low Loss 400 is a high performance alternative to CommScope® WBC-400, Times Microwave Systems® LMR-400, Belden® 9914 / 9913 / 7810 and Andrew® CNT-400 coax cable.

This is high performance coaxial cable which has become the standard of the outdoor wireless LAN industry. It is also used by Amateur Radio stations looking for higher performance for VHF/UHF, microwave, and satellite communications as compared to standard RG-8/U. It also works very well on HF, with much higher power handling capability than other coax alternatives.GENUINE BRAND NAME COAX CABLE
FACTORY DIRECT - WE ARE THE MANUFACTURER
PRODUCED TO STRICT QUALITY CONTROL STANDARDS
SATISFACTION GUARANTEE AND WARRANTY

BUY FACTORY DIRECT FROM JEFA TECH FOR GUARANTEED QUALITY
Our coax cable is produced to strict tolerances and stored in our climate controlled warehouse in the state of Maryland, USA. JEFA Tech has been in business since 2003. We are well established and here to stay and support you with a quality product. We stand behind the quality and performance of the cable and offer a 30 day money back guarantee and five year warranty.

JEFA Tech Custom Coax Cable Assemblies

JEFA Tech manufactures custom cable assemblies at our facility in Hollywood, Maryland. We pride ourselves in quality combined with short lead times. All of the Coax Cable Assemblies listed here are professionally assembled in the USA at our facility in Hollywood, Maryland. Look for our orange...

www.jefatech.com

 

[dave457]

Can't go wrong with jafe tech, I been using it for over 10 years.... never a problem

 

[dave457]

Also they are fast and free shipping

 

[ForestRunner98]

Another JEFA user….good stuff!!!

 

[Blackcat630]

I have a couple runs of Jefa.. no problems

I also bought a 500ft reel of Shireen lmr400 knockoff and split it with a buddy. No issues with it either.

 

[Naysayer]

$71.50 plus tax for 50' from JEFA as of 5-14-23. I remeasured and need only 58' from ATU to Ant Feedpoint. I'll long patch-cable for last few feet. Leaves me with a full 30' outside (straight up vertical) and the remaining 20' running horizontal inside along floor.

I read entire thread and appreciate all the input. I'm in the camp that some installs matter more. I'm located inner city so coax is likely more important noise/TVI-wise despite everyone having FIOS/Cable.

 

[L2]

$71.50 plus tax for 50' from JEFA as of 5-14-23. I remeasured and need only 58' from ATU to Ant Feedpoint. I'll long patch-cable for last few feet. Leaves me with a full 30' outside (straight up vertical) and the remaining 20' running horizontal inside along floor.

I read entire thread and appreciate all the input. I'm in the camp that some installs matter more. I'm located inner city so coax is likely more important noise/TVI-wise despite everyone having FIOS/Cable.

$80 50 feet genuine Times Microwave LMR400.

Patch cables, Jumpers, Coax Assemblies, Coax, Belden, Times Microwave - DX Store

www.dxstore.com

No affiliation, just a happy customer.

 

[Naysayer]

Soon on the primary cable run. I've moved tetrode amp to my operating location several times only to move it back to work area for some mod or adjustment. New rg8x patch cables & hardware needed so I can switch Tets in & out w/ATU. It takes time to maintain a station that can reliably transmit more than a hundred watts.