• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

M104 and A99


104 horizontal and mount the a99 right above it, put an rf choke aka ugly coil at feed point of the a99, the m104 will act as a ground plane per say for the a99 and will work well no loss
 
  • Like
Reactions: Marconi
http://www.k8dns.com/balun.html

All sort of information online, I think for 27mhz specifically it is 5 1/4 turns on 4" inside diameter.

There is a chart some where on this forum that gives exactly how many turns to get the best choke for the target frequency.

Do not worry about the arm chair engineers that will tell you only this way works or only that way works.

Google is your friend and YES the RF choke does work and it helps prevent rfi and cmc especially on 1/2 wl end fed antennas.

Most important is you get your antennas installed start making contacts and have fun.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Greg T has left the room.
  • @ BJ radionut:
    EVAN/Crawdad :love: ...runna pile-up on 6m SSB(y) W4AXW in the air
    +1
  • @ Crawdad:
    One of the few times my tiny station gets heard on 6m!:D
  • @ Galanary:
    anyone out here familiar with the Icom IC-7300 mods