Hey guys. I'm runnin a magnum S-6 and was wanting to kno if their was any way I could modify the roger beep to make it a deeper tone? Just curious. Thanks in advance.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!
magnum S-6 question
- Thread starter southerntrucker
- Start date
Not familiar with that particular circuit, but in general the resistor will change the length of the beep and a capacitor in that same circuit will change the pitch of the beep tone.
http://www.cbtricks.com/radios/rflimited/magnum_s6/index.htm
http://www.cbtricks.com/radios/rflimited/magnum_s6/index.htm
Would one of y'all happen to kno where the roger beep circut would be? Also how can I make it to where I can here it in my talk-back? Thanks for the help guys.
Mackmobile was right. I got it backwards. The resistor will change the pitch and the capacitor will change the length of the beep. On the S-6, you might have to call up a Magnum tech or warranty shop. They should be familiar with those boards.
- No one is chatting at the moment.
-
-
@ Geoexplorer69:Coax question. I just put up a new Sirio monsoon base antenna with 100’ of rg8u coax testing with myMFJ antenna analyzer shows 1.4 swr at 26.965mhz and a 1.1 at 27.405 mhz . When I checked the ohms it’s steady a 30 ohms across the entire bandwidth.
-
-
-
