Magnum S-9 CB Radio Repair Shops

[ctvanover]

I am looking for a CB radio repair shop that can work on a Magnum S-9.

I have an Magnum S-9 and when you first turn it on it goes from 27.185 to 24.440 until it warms up a bit and then it goes back to 27.185. Every now and then for the first 30 minutes to an hour if the truck leans to the right like in a curve it will change back to 24.440 and when the truck sits back up straight it will come back to 27.185. Every once in a while it will go to like 26.665 or something like that and you can tap the bottom of the radio and it will straighten back up. it's almost like a loose wire or something, idk?

Any and all help will be greatly appreciated!

 

[space cowboy]

http://www.dtbradio.com/

 

[Tucker442]

Dave doesn't work on Magnums, try Mountain View Electronics in Tennessee they do Magnum warranty work too.

 

[hotrod]

bobscb.com

 

[Tucker442]

I heard Bobs isn't taking any work unless it is a radio he sold

 

[9C1Driver]

All correct so far, DTB hates Magnum radio's so you don't want to send it to him. Bob's CB is outstanding but no taking mail in repairs right now. Here are several places.

1) Custom CB Radio http://customcbradios.com/

2) Key CB shop

3) Authorized Magnum Repair shop
The Radio Shop
4045 E Guasti Rd
Ontario, CA 91761
909-390-5056

 

[ctvanover]

Thank You! I appreciate your replies.

 

[peter frassanito kk4sdr]

All correct so far, DTB hates Magnum radio's so you don't want to send it to him. Bob's CB is outstanding but no taking mail in repairs right now. Here are several places.

1) Custom CB Radio http://customcbradios.com/

2) Key CB shop

3) Authorized Magnum Repair shop
The Radio Shop
4045 E Guasti Rd
Ontario, CA 91761
909-390-5056

they suck!!!!! back when I was getting high I would sell them radios I "acquired" and they would still buy them knowing where they came from, but to each his own I guess

 

[ctvanover]

Mountain View Electronics in Tennessee evidently is not doing anything. I tried to call but their number has been disconnected or is no longer in service.

 

[psycho]

Why not send it back the factory for the repairs? I would check for cold solder joints around the perimeter of the board.

http://www.magnum-radio.com/Site.asp?CID=2

 

[curlyjo]

I am looking for a CB radio repair shop that can work on a Magnum S-9.

I have an Magnum S-9 and when you first turn it on it goes from 27.185 to 24.440 until it warms up a bit and then it goes back to 27.185. Every now and then for the first 30 minutes to an hour if the truck leans to the right like in a curve it will change back to 24.440 and when the truck sits back up straight it will come back to 27.185. Every once in a while it will go to like 26.665 or something like that and you can tap the bottom of the radio and it will straighten back up. it's almost like a loose wire or something, idk?

Any and all help will be greatly appreciated!

The Radio Shop. Ontario CA

 

[222DBFL]

Dougs custom cb would work on it I would think. Email him and call as well.

 

[ctvanover]

Thanks but I sent it to Brian Smith at Trucks CB Sales & Repair in Glasgow, KY. He found a bad ground and fixed it for me and then shipped it back to me for all for just under $60. You can find Brian here on his facebook page,

https://www.facebook.com/groups/861774723847070/

There's another guy who is a friend of mine that sales and repairs also down in TN his name is Chad Jolley he does really good work to and you can find him here,

https://www.facebook.com/groups/437952643012646/

http://stores.ebay.com/BeavisCbShop

Either Brian or Chad will do you right!

 

[Oatmeal]

Which Magnum S9 do you have ?..
The one with the 1969 finals in them are sweet radios when setup right..

 

[9C1Driver]

Which Magnum S9 do you have ?..
The one with the 1969 finals in them are sweet radios when setup right..

10 years ago I picked up a mint 1969 final S9 that had been set up by Bob's CB. It even had a sweet 30 second watergate recorder installed with tiny buttons on the side. It was a superb talker, the Top Guns worked like they should (Bob's always gets this right), and the recorder played back clean and clear. Like a dummy I sold it.