New Look For Delta Force

[lords]

changed the S-meter light over and the LED display..
Added a swing kit..thanks to the schematic for this
Volted it and with the swing kit
can key 3/4 to 1 watt swinging 40!
and with the RF Power up 100% it keys 18 swinging 40.

 

[KC2OST]

What mod did you do to the DeltaForce?
What are the lights in the display? Led's? What voltage?

 

[Butcher318]

Cool deal, be careful with that 18 watt dead key, thats a bunch. Most radio's I have ever had were usually tuned to 2-8 dead key range, I have an S9 tuned by Bob's cb and it's range is 1-10.

I take it you volted the finals then to get those extra 5-10 watts?

 

[Captain Kilowatt]

ohman, nothing like a low DK... can you het it any lower than 3/4 of a watt? I want to be able to key up and not even have anybody know, then when I talk I want to swing up! how did you do that mod?

Try SSB.

 

[KC2OST]

it says:

can key 3/4 to 1 watt swinging 40!

 

[AudioShockwav]

linearone wrote:
ohman, nothing like a low DK... can you het it any lower than 3/4 of a watt? I want to be able to key up and not even have anybody know, then when I talk I want to swing up! how did you do that mod?


Try SSB.

Try double-sideband reduced carrier (DSBRC) :twisted: :twisted: :twisted:

73
Jeff

 

[lords]

moved to mods secton

 

[Captain Kilowatt]

linearone wrote:
ohman, nothing like a low DK... can you het it any lower than 3/4 of a watt? I want to be able to key up and not even have anybody know, then when I talk I want to swing up! how did you do that mod?


Try SSB.

Try double-sideband reduced carrier (DSBRC) :twisted: :twisted: :twisted:

73
Jeff

Yep,that's what low DK and high swing really is,DSBRC. I was just being sarcastic about the zero DK and all swing thing when I suggested SSB. Why occupy two sidebands and have no carrier when one sideband will do.

 

[lords]

 

[Butcher318]

You put some work into that delta no doubt. I love em.

 

[lords]

 

[KC2OST]

only heat i am getting is from the PNP Power Amp Regulator
which in the near future I am updating to a different one suited for the board....

If you volt the finals you don't have to worry about the regulator.

 

[lords]

 

[TonyV225]

So you have not really experienced anything heating or getting hot ???? I would think she would heat up a little after the voltage adjustment

 

[lords]