B
BOOTY MONSTER
Guest
if that radio has a external speaker jack plug one in it with the speaker on the passenger seat or floor and see if it still does it .
Make sure your swr jumper cable is male at both ends.
a mag mount gets its ground through capacitive grounding with the sheet metal below it ...
really?? i guess i can disconnect the braid on my coax then,...... jus sayin:blink:
if that radio has a external speaker jack plug one in it with the speaker on the passenger seat or floor and see if it still does it .
Mic wiring and/or mic plug.
Even though it tried a diff mic and still got the same beep?
So long as it is the stock Cobra mic, or another mic wired specifically for Cobra - that won't be the problem.
BTW - Be SURE the antenna is wired up correctly!
So, im confused. First it seemd like you were suggesting it was the mic. But your last comment suggested it probably isnt the mic. Do i have that understood correctly? (I used a stock mic from my neighbors Cobra 19 IV)
For my antenna, i have the antenna insulated, and the threaded part of the coax cable is grounded.
ps I bought that SWR meter, and it should be here next week.
BTW, thanks for helping me out people. I probably would of burnt my radio out by now and bought a new radio, then i probably would of burnt that one out too, or some stupid shananagins.