• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

Nomad's plate choke cured my10-20M amp woes.

Naysayer

Solder Balls
I Support WorldwideDX.com!
Mar 6, 2020
252
196
53
New York
11M test just now showed over 400w AM from a 1970's 23 ch CB barely powered by a 12v, 2 amp bench supply. Amp still on work table so I was only using one plate transformer (1800 400mA). That's a best ever for 27Mhz especially given I did not even tweak Tune, Load or RF Input, just took a good guess and as the first try I used a 6A mains fuse. There's much more potential here. Tickled silly to see it working above 40M. These 4cx300a tubes are amazing for their size. Time to put the bottom cover back on and prepare for a full power test and maybe even use if it holds together. It was a good day.
Neil, nyc
 


dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    GlocknSpiel has left the room.
  • @ kingmudduck:
    So I have a cobra 138xlr and the meter dose not work... It dose not key up and signal dose not work.... It is not stuck it the meter moves freely. now wires are resoldered on both ends...So now that do I look at. Could it be a diode or a transistor?
  • dxBot:
    Greg T has joined the room.
  • dxBot:
    Greg T has left the room.