-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Old Turner mic for a new mobile
- Thread starter 2NC995
- Start date
Up front, I care about SSB only. Pretty much the only time I’m on AM is to find who’s bleeding on meLooking at the M+2 and M+3. Cool old stuff.
Questions:
1. Any recommendations?
2. Do any of the mobile mics have the +3s legendary speech compression?
Thanks!
I've always used a Turner +3b on whatever mobile rig I was using, occasionally swapping it out for their Roadking 70/76 which looks like the M+3b and has noise canceling benefits....never did take to the +2 hand mic though. My experience was that it became a bit uncomfortable after yakking on the radio for some length of time because of the corners in the design. Buying used M+2/U it's hard to find one where the plastic they used at the time didn't get ugly, and very often, where the push-to-talk tab wasn't broken (top rear almost always).
Got a scary looking Plus 3B base mic in the mail today...hopefully it works!
S&W357
$upporting Member KO4RJD....WDX-556
Now I’m off to play with the wiring
Echo Echo
Just don't feed it after midnight... (possibly my last Christmas reference)..(maybe)
S&W357
$upporting Member KO4RJD....WDX-556
2NC995...did you get that Scary +3B squared away? Nosey folks want to know.
2NC995...did you get that Scary +3B squared away? Nosey folks want to know.
I sure haven’t. No time to mess with it yet. Hopefully this weekend I’ll get it sorted out.
Running as a 4 pin with 6 pin adaptor cable...so I’m thinking it’s not currently set up as a 4 pin cobra pattern.
i run a telex/turner rk56 on my cobra 29gtl in my pickup with fine reports,,, on my first generation president washington i run a turner super sidekick,,,, and on my galaxy 2527dx i run a ugly ugly turner +3b that i had got in the bottom of a box of trade stuff, it was in pieces and missing some wiring and the relays was loose and apparently been apart at one time,,but with some parts from junk box i got it going perfect,, but paint it up? nope i like its worn off black paint and bare metal look,, it gives it character,,,
Most of us seem to need an overhead turntable to rotate.
Attach six, seven mikes . . . plug & play as whimsy dictates.
Attach six, seven mikes . . . plug & play as whimsy dictates.
Have to break out the drawing board for this one.
The +2 doesn’t do anything hooked to the Lincoln, aside from change freqs.
The +3 seems to work well, but randomly changes freqs.
Both work as expected on a 4 pin radio.
Every other 4 pin mic I own seems to work fine with the adaptor cable.
The +2 doesn’t do anything hooked to the Lincoln, aside from change freqs.
The +3 seems to work well, but randomly changes freqs.
Both work as expected on a 4 pin radio.
Every other 4 pin mic I own seems to work fine with the adaptor cable.