Hi all,
Sorry I haven't been around much. I've been busy with a project for someone.
The project?
First ever 100w Uniden Washington (8719) base with a Mega-watt S-350-12, 12a power supply and RFX95HD.
For me it's been a journey on this project. I first had to fix all issues, then recap, then swap out the regulator and finally realign it completely.
Then is when I started the conversion to the 12a power supply and mount the amp.
Outcome?
Beautiful.
Upon keying the amp for the first time, setting the deadkey to 18w, it runs cool to warm and produces right at 95w pep (around 63w peak).
I've had it turned on for the past 5 hours and I'll key up about every 20 minutes and hold a key for about 30 seconds. After about 15 seconds the key will gradually drop to around 15w and then slowly climb back up to just under 18w.
I have a video of the completion but I can't seem to get it to upload in here. I tried the "Attach Files" route and the "drag image" option. Both come back with memory errors.
Anyway, on to the next one.
Sorry I haven't been around much. I've been busy with a project for someone.
The project?
First ever 100w Uniden Washington (8719) base with a Mega-watt S-350-12, 12a power supply and RFX95HD.
For me it's been a journey on this project. I first had to fix all issues, then recap, then swap out the regulator and finally realign it completely.
Then is when I started the conversion to the 12a power supply and mount the amp.
Outcome?
Beautiful.
Upon keying the amp for the first time, setting the deadkey to 18w, it runs cool to warm and produces right at 95w pep (around 63w peak).
I've had it turned on for the past 5 hours and I'll key up about every 20 minutes and hold a key for about 30 seconds. After about 15 seconds the key will gradually drop to around 15w and then slowly climb back up to just under 18w.
I have a video of the completion but I can't seem to get it to upload in here. I tried the "Attach Files" route and the "drag image" option. Both come back with memory errors.
Anyway, on to the next one.