-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!
Quick question...
- Thread starter UFO411
- Start date
For the short-short term, no. I just wouldn't expect a butt splice would hold up very long in the wind.
Way better off making a couple wraps with each end and soldering it if your not going to replace it.
It'll still carry the RF currents either way. Remember, RF currents flow on the top of the wire not through it.
Way better off making a couple wraps with each end and soldering it if your not going to replace it.
It'll still carry the RF currents either way. Remember, RF currents flow on the top of the wire not through it.
- No one is chatting at the moment.
-
-
-
@ Geoexplorer69:Coax question. I just put up a new Sirio monsoon base antenna with 100’ of rg8u coax testing with myMFJ antenna analyzer shows 1.4 swr at 26.965mhz and a 1.1 at 27.405 mhz . When I checked the ohms it’s steady a 30 ohms across the entire bandwidth.
-
-
