• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

RCI2995DXHP, latest and greatest. As always.

nomadradio

Analog Retentive
I Support WorldwideDX.com!
Apr 3, 2005
7,721
12,672
698
Louisville, KY
www.nomadradio.com
So here's the latest, greatest 2995 radio. A model number that's been made and sold for 23 or 24 years, best I remember.

Previously there was the "DXCF" suffix, as in "Cooling Fan". It had been an extra-cost accessory, and this model made it a stock feature.

Now we have the "RCI2995DXHP". This one arrived to be uncrippled and cover the complete frequency range outside the two ham bands.

MawnCr.jpg


First thing that caught my eye was the part number on the shipping carton. Never noticed the word "TURBO" embedded in the carton's stock number. Quirky. Never noticed that before.

HqEXif.jpg


The first product built by RCI that had the linear strapped to the back was the Galaxy Saturn Turbo, around 30 years ago or nearly.

No "RT" components of any kind on the radio circuit board. Just a single IRF520, this one made by Siliconix. Used to be an American company.

t6Itiz.jpg


The main circuit board hasn't changed much. Instead of a small white sticky label to show what model the pc board is to used for, just some Sharpie mark.

9GDLKi.jpg



Ever since Y2K or so, the serial number on a radio built by RCI has a letter at the beginning. It indicates the country where the radio was built. Every new radio we see with the RCI name on it is coming from Malaysia, like this one. New radios with the Galaxy and Connex names have serial numbers that begin with the letter "V" as in Vietnam. It's worth remembering that 30-plus years ago when RCI's plant in Melaka, Malaysia was getting their feet under them they had quality issues. Took a few years, but they cleaned up their act. Seems to me the Vietnam facility is having the same "teething" issues with quality control. Just seems to be no mistake that RCI's name brand radios are made only in the plant with decades of experience. The new guys in Vietnam are building radios with "client" brand names on them.

C7iNfL.jpg


Hmmmm.

I didn't tear the radio down to see what's in the linear amplifier. Not a part of this job, cutting it over to full coverage for a new-radio dealer.

I can confirm it will show over 200 Watts PEP on AM with the limiter turned up. Sideband will sound a lot better turned down to 150 or 170 Watts PEP.

Still a bit meaner than the previous incarnations.

Evolution never stops.

73
 
Last edited:

I’ve been using one for a few months now. Great radio except in transmit LSB where the radio now needs tuning as my voice sounds pinched. Power is recorded at about 350W pep. I use dynamic Astatic microphone with it to give it the extra punch for DX.
 
Great radio except in transmit LSB where the radio now needs tuning as my voice sounds pinched.
Not sure how you can consider a radio that needs adjustment when it's only a few months old as "great"! A brand new radio should operate without issues for at least a few years before it needs alignment or tuning.
About what I'd expect from a Ranger product though. Which is why I avoid them like the plague.
 
I wish they would do a 69 base plus with that power output, until then my dx 2517 and driver will have to do the job. The receive on the old black base is as sensitive as any of the new quixing radios and I have an external dsp unit I can use if I want but it stays unhooked most of the time due to the low noise level at my station.
 
  • Like
Reactions: Eldorado828
I believe siliconix is the same company as Vishay.

One of the big issues i have with these chassis is that they are using the small ceramic insulators on the driver, final, and the mosfets in the amp.

notice in Nomad's pic that they don't even cover the whole back of the transistor.

I replace these with full sized ones in the radios that i work on.
LC
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    EVAN/Crawdad :love: ...runna pile-up on 6m SSB(y) W4AXW in the air
    +1
  • @ Crawdad:
    One of the few times my tiny station gets heard on 6m!:D
  • @ Galanary:
    anyone out here familiar with the Icom IC-7300 mods
  • @ Crawdad:
    7300 very nice radio, what's to hack?
  • @ kopcicle:
    The mobile version of this site just pisses me off