Sidebar Sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

Short Review - Anysecu / Quansheng UV-K5

w9cll said:
Yes I am finding that as well, putting a better antenna on it and its not horrible.. well not completely horrible..
Click to expand...
Then you need to use another firmware/ If you look at the post with the graph this is the range that you can transmit with the correct firmware. I will post the link that we both used later tonight.
 
Just finished my tx measurement and warning!.
Do not tx under 136MHz without hw modification.
50MHz tx 2nd harmonic 100MHz is stronger then 50MHz signal!.
70MHz tx 2nd harmonic is equal to tx freq !
 
  • Like
Reactions: Shadetree Mechanic
AM rx at weak signals is good but there seem to be issue with agc.
High AM rx signal level sound is badly distorted.
 
Last edited:

jtrouter said:
Then you need to use another firmware/ If you look at the post with the graph this is the range that you can transmit with the correct firmware. I will post the link that we both used later tonight.
Click to expand...
No the firmware is not the issue, its a poorly made radio with overall terrible receive
 

dxChat
Help Users
  • No one is chatting at the moment.


      Top Bottom
      Back