I only use the first 2 , it's fairly easy with a good set of gloves with grip. I've had the Rohn pushup mast in the past, and the spiderbeam mast smokes it.
What length did you use for the top section. Getting ready to put one upWell shoot I forgot. Ok well a full month of this antenna, I did reverse the mess-up in my last post. SWR is perfect 1.1 - 1.4 all thru 26.965- 27.855. The receive has less static compared to the antron99 and is a upgrade on transmit also. The SWR doesn't change when it rains, my guess is the cased coil. I'd really like to test it against a Maco v/5000
What length did you use for the top section. Getting ready to put one up
But would like to see if I can tune for 10 and 11 meters
I can't remember the exact number on my 2008, but here is what I did. Using the chart in the manual, I calculated how many MM represented each 10khz step. Then, I started with finding the difference between channel 19 and channel 38. I transferred that number into MM and then set my antenna for channel 38 because I go up, out of the band much more often than below. I can't remember the exact number, but I'm guessing I used about 280, or 285 MM...maybe 290? Anyhow, if you calculate MM to 10khz steps it's easy to figure out.
Found this so your numbers would be correct. Thanks
I'm beginning to think this antenna is a joke. Nobody seems to hear me on it. I replaced the old coax on it thinking it was bad and put 213 on it. No change. Nobody can hear me so when it's nice it's getting replaced with my old I max 2000.