in the new manual for this yagi antenna on 27.mhz or above
instead of cutting just drill new holes and insert the element
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Sirio SY27-3 3 element yagi.
- Thread starter SMILEX2692002
- Start date
in the new manual for this yagi antenna on 27.mhz or above
instead of cutting just drill new holes and insert the element
Make a cut in the outer tube so a hose clamp can be used to squeeze the inner tube. Use anti seize that has metal in it between the tubes to seal out moisture and improve conductivity.
I now have the SY27-4
It required cutting all the elements with a hacksaw.
It was pretty straightforward and simple. I bought a metric tape measure to make all the measurements.
I cut mine for 27.500
It works great.
It required cutting all the elements with a hacksaw.
It was pretty straightforward and simple. I bought a metric tape measure to make all the measurements.
I cut mine for 27.500
It works great.
- No one is chatting at the moment.