Sidebar Sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

Strange swr situation

TomGallopavo

TomGallopavo

New Member
Oct 21, 2024
7
0
1
59
I'm new to cb. I was having some issues with the swr reading on my Ga;axy 959 which I posted about here. I thought I would be better off by getting an swr meter. So I got an Astatic PDC1 and a RG-58A jumper. Followed youtube videos and the swr reading were extremely high. Like near the set point. I don't know if I can trust the new stuff as the readio is reading just over 2. The jumper seems very cheap quality. I would like to have this sorted out before I permanately install the headliner. any advice is appreciated. As I said in the other thread I have a four foot fire stick I could switch to but would mount that to the headache rack.
 

In any cb application in a mobile there is always a need to adjust your antenna for the best SWR. What antenna and vehicle do you have? Where is the antenna mounted on the vehicle and how?
 
9C1Driver said:
In any cb application in a mobile there is always a need to adjust your antenna for the best SWR. What antenna and vehicle do you have? Where is the antenna mounted on the vehicle and how?
Click to expand...
Little wil, center of the cab roof, regular cab, 1998 dodge ram 2500.
 
You should be able to get a Lil Wil to at least 1.5 SWR. Just remember to check it on AM with enough carrier to get to the calibrate point on the meter. Should be able to just move the stinger up or down. Here is a nice link that can help. A mag mount on top of a truck like that is perfect. Just slap it up there and set the SWR.

How to use a SWR meter for CB Radio | CB Radio Magazine

How to use a SWR meter for CB Radio ADJUST YOUR SWR on your CB radio Equipment needed: SWR meter, short jumper coax 3 foot. Procedure: The SWR meter needs to be placed in line between the antenna and the CB. Connect the antenna (normally connected to the back of the CB ) to theHow to use a SWR...
cbradiomagazine.com cbradiomagazine.com
 
  • Like
Reactions: Shadetree Mechanic
9C1Driver said:
You should be able to get a Lil Wil to at least 1.5 SWR. Just remember to check it on AM with enough carrier to get to the calibrate point on the meter. Should be able to just move the stinger up or down. Here is a nice link that can help. A mag mount on top of a truck like that is perfect. Just slap it up there and set the SWR.

How to use a SWR meter for CB Radio | CB Radio Magazine

How to use a SWR meter for CB Radio ADJUST YOUR SWR on your CB radio Equipment needed: SWR meter, short jumper coax 3 foot. Procedure: The SWR meter needs to be placed in line between the antenna and the CB. Connect the antenna (normally connected to the back of the CB ) to theHow to use a SWR...
cbradiomagazine.com cbradiomagazine.com
Click to expand...
See my original post linked here or in antennas.
 

dxChat
Help Users
  • No one is chatting at the moment.


      Top Bottom
      Back