Well, the switches are not sitting in their detent when pushed in other than the power button. They are working as momentary contact switches. Im no expert on these amps. Does the colored covers have something to do with them not sticking in their detent position when pushed in ?
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Texas star modulator parts
- Thread starter bevis
- Start date
Nope, the lenses don't have anything to do with the switch locking into position. Sounds like you're needing the whole switch bank and is a little bit more labor. You'll need to pull the pcb from the housing in order to get to the solder points underneath.
Barketts site is back up and might have what you're after.
Sadly Barketts is OOS on all switch banks / individual switches.....
I sent them an email to see if anything will be available in the future.
Here's Barketts response.. Major Bummer............
Hello
I had them on order for many months with no luck in getting them. They promise to complete my order but never get around to it. Not sure what is going on with TS. I sure could sell many TS parts if I could get them.
Thank you
Barkett Electronics
Hello
I had them on order for many months with no luck in getting them. They promise to complete my order but never get around to it. Not sure what is going on with TS. I sure could sell many TS parts if I could get them.
Thank you
Barkett Electronics
It's been the same story for the last year or so, Galaxy is struggling to get everything like a lot of other manufacturers. It's not going to get better any time soon either.
A used parts amp is probably best to repair yours just like Tokin suggested.
A used parts amp is probably best to repair yours just like Tokin suggested.
According to barkett, many aren't available to him and nothing is coming in from galaxy. What I was told.
Last time I spoke with John at Texas Star they were getting switches in pieces.
Before the switches came assembled , now one person builds them from individual parts.
It is a fragmented assembly process with several people working from home.
73
Jeff
Before the switches came assembled , now one person builds them from individual parts.
It is a fragmented assembly process with several people working from home.
73
Jeff
- No one is chatting at the moment.
...runna pile-up on 6m SSB