Trying to fix a rotor controler

[Alan Blackmon]

Does anyone know where to buy a gear set for a Channel Master 9512 rotor controller?

 

[M0GVZ]

Its that old I think you'll be making your own.

 

[Alan Blackmon]

I was thinking with tech today I should just be able to print one.

 

[BJ radionut]

http://antennapartsoutlet.com/Pages/Products/ChannelMasterPages/9521A.html...NIB $115 w/ Free Shipping
I think I paid $110 couple years back...use on my TV antenna.
However that thing is coming down this Summer...They have NO Brake...The wind spins them out of calibration endlessly. The clamps are pretty lame also...But for El-Cheapo really not the worst rotor I have ever used
All the Best
Gary

 

[Alan Blackmon]

Well I solved it. Bought a controller and rotor motor from guy who got it from RS back in the day. He sent me a video of it working. My brother will bring it to me during a visit later this week. I get to try it and verify workability then pay for it. The rotor was turning a 20 meter two element light weight beam. I figure my plans for either a 10 meter moxon or 6 meter moxon should work just fine with this rotor.

 

[Marconi]

If that does not work out...consider Norm's Rotor Service. Just an email might answer your questions.

https://www.normsrotorservice.com/

 

[Alan Blackmon]

Thanks Marconi. I did check on their web site and it said no parts available for my model.

 

[BJ radionut]

I figure my plans for either a 10-meter Moxon or 6-meter Moxon should work just fine with this rotor.

Should be plenty big enough for BOTH bands Alan!

https://www.qsl.net/dk7zb/Moxon/Dualband-Moxon_10+6m.htm

https://www.g0ksc.co.uk/lfa-fb-test/28-50mhz-mini-yagi.html
All the Best
Gary