• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

What radios (if any) did the 1969 final come in from the factory?

Turbo T

Certified CB Rambo
Feb 2, 2011
963
142
53
Pulled open my Uniden Washington base station and noticed it had 2 finals, one was a 1969 final, the other was a 2166 final. That's not stock is it?
 

Attachments

  • Uniden Washington inside 002.jpg
    Uniden Washington inside 002.jpg
    178.4 KB · Views: 4
  • Uniden Washington inside 003.jpg
    Uniden Washington inside 003.jpg
    150.1 KB · Views: 4

What 359 said.

The 2166 is the driver. 1969 the final. Factory set up for hundreds of 4 watt straight CBs.
 
Thanks. I was under the impression the final had been upgraded at some point.


Nope it's bog standard as is the 2sc2166 driver, the 2sc1969 final may have replaced a 2sc2312 depending on how old it is, as uniden generally used 2sc2312's in ssb radios until they started running scarce.

the 2sc2166 and more commonly nowadays the 2sc2078 are whats used as a final in most if not all 4w am/fm cb's,nec's 2sc1306 was another similar transistor used in the early days and can be found as drivers in ssb sets with an accompanying 2sc1307 as the final or as the final itself in am/fm sets.

2sc1969 and 2sc2312 were found in most of the ssb radios either singly or in matched pairs for higher power (export models) made until recently when mosfets started replacing them due to mitsubishi discontinuing their 27 mhz rf power transistors,

in the uniden president range, lincoln,2600,2510,2830 jackson and a couple of other prestige exports the 2sc2312/2sc1969 dual finals were factory replaced with motorola mrf 477 or later the mrf 455 which gave higher gain and was more rugged than the japanese transistors at a price.
 


Write your reply...
dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    NOTICE: The Midwest 6 Meter DX Group will be set up at Hamvention in Xenia...BOOTHS 9107-9111...COME SAY HELLO!
    +1
  • @ W4KVW:
    I mete KZ4RR there is 2013 for the 1st time & we live about 50 miles apart & had talked for many years. Traveled halfway across the country so we could finally meet. LOL W4KVW EM80wg
    +1
  • @ BJ radionut:
    Lee/KZ4RR will be thr at XENIA this year again...will be great to see him...We work almost every morning on 6m SSB
    +1
  • @ W4KVW:
    I will not be there but hopefully by the end of this month I will have my New tower and antennas back in the air including my M2 6M5X. The old tower and all of my antennas came down in October 2023 during a Hurricane.
    +1


      You do not have the permission to use the chat.