The ac side is dead ( bad transformer) so I was told by my tech to hook it to DC and it should fire right up. It doesn't. It does zip. It has voltage to the on off switch but nothing else. Any ideas? I'd like to get it running because it's literally mint and has all the filters .
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Yaesu ft 902dm dead
- Thread starter Staybolt
- Start date
I am not familiar with the 902 but I did find the service manual and the Survival manual for the 901-902, see attached files.
73
Jeff
73
Jeff
I hate to see it get tossed, there may be someone along here in time that is more knowledgeable than I.
There is KC4UMO that repairs old radios, I know from searching this morning he has several YouTube videos of repairs he has done on these.
Also Paul Harold is well know for working on the 101 radios, he may be able to point you towards some one that can help.
I am sure there are guys over on the Fox Tango group that could help as well.
73
Jeff
There is KC4UMO that repairs old radios, I know from searching this morning he has several YouTube videos of repairs he has done on these.
Also Paul Harold is well know for working on the 101 radios, he may be able to point you towards some one that can help.
I am sure there are guys over on the Fox Tango group that could help as well.
73
Jeff
I may have found someone. I'm in talks now with a ham that specializes in the 901 and 902dm. I posted an add on QTH and he responded. He has an ac transformer I'm getting from him
