You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
I am still hearing lots of bass roll off is there any place I could take a low lovel line out before it goes through the audio amp? Also a way to tap into the mic input bypassing any restrictions that are robbing the low end sound.
As mentioned here on this other radio...
When comparing the pb010ab Cobra to the later anytone 5555 etc there is a much fuller sound coming from the anytone, the old pb010 cobra has the bass rolled off compared to the fuller sounding anytone.
I see there are some Hi Fi tx Rx mods for other radios is there any for this?
Looking at it closer only loud strong signals seem to make a noise from the speaker, and it's doing It on all modes I was wrong thinking it was just fm.
So far changed the 10.695 filter, the 1000uf cap in audio circuit that was swollen a little on the top, still nasty broken received audio.
No I mean the roll off in the audio circuit makes the sound thin and tinny, lowering down to say 70hz And extending nicely to 4k or 4.5 sounds much nicer.
If you pass a tone generator through on tx on say a pb010ab chassis you can pass upto 4.8k easy.
So looking for more depth really as 4.8k...
Hi are there any mods to let through some more body in the audio as in bass? And possibly some for tx ? The high frequencies are there on both tx and Rx but having no bass in the sound makes this radio tiresome on the ears.
73 all
Hi does anyone know about sorting out the receiver issue as where strong loud signals require turning the rf gain down to remove distortion on the audio?
73
Hi is there any master resets than can be performed this has turned up not working was working when sent, before I send it back would like to see if I can fire it up for once ad for all?
73
Thanks this is what I am looking for, I know the owner so I know his voice from his other radios, just this was sounding awful distorted when trying to get any volume due to muddy mid bass content.
Hi just trying to make head or tail of the instructions to set bias for finals, I have the little test board loose and connecting the meter to the so said correct places does not even come close to what I have, I get no current in ssb on con1 pins one and two.
Any ideas ?
73
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.