Hi all, I am new to the forum, could use some help. I just acquired a Cobra 2000GTL in nice shape. Has extra channels, good receive, AM output is 4 watts and swings to about 10 watts but SSB only PEAKS to about 10-11 watts output. I looked over the radio and see that TR24 has been removed so it should have much more output. I did a quick alignment but it did not help too much. A couple of questions, in the Cobra 2000 GTL service manual it say the driver bias should be 30ma and the final bias should be 60ma but I have seen post showing different values. To properly align the radio does any one know what values I should really use? Also, any other suggestions for getting more SSB output? I am using a good meter reading PEAK output, in to a dummy load and I have tried a couple of different mics. Any help appreciated. Thanks, Adam