I am running the above mentioned radio. What linear amp would work well with my radio set up to get another 100-150 Watts ??? This will be going in a truck FYI.
Thanks for your help
Since the radio now does 100-120 watts peak there is no way you can run a small amplifier that only adds 150 watts. You will need an amplifier that can handle the power your radio does. Something like this below will work.
You must decide on what you want. Either you have a basic peak and tune done on your Cobra 29 good for say 20 watts. Then get a small amp like a Texas Star 250 and you get 200-250 watts.
Since you decided to hotrod your radio simply put you need a big amp. Probably be in the 700 watt range.
TNT 600hd
Transistors 4 x 2SC2879
Dimensions H 4 3/4' x L 11' x W 6 3/4'
Amp Draw (maximum) 100
Class B biasing
SSB Delay yes
Pre-amp yes
Driver Required TNT 250 (optional)
Power Output (RMS) 300 Watts
Power Output (PEP) 625 Watts
Driven Power (RMS) 400 Watts
Driven Power (PEP) 1000 Watts
install recommended with 4ga wire
and 125a fuse. Max input carrier of
20w or 300w max carrier from amp.
Max peak input 240w.
Price: $375.99
http://www.xforceamps.com/category/TNT-35