I had to repair my soft-start board after the thermistors burned up. I could not understand the thermistor datasheets but found a good YT video (KISS Analog) that reviewed the material line by line at:
Seems I placed too much faith in fuses. Even the fast-blow are not fast enough. Best part of YT vid (above) is the reference material on what it takes to blow a given fuse --in Current & Time. An 18 minute vid, worth a watching. neil, NYC
Seems I placed too much faith in fuses. Even the fast-blow are not fast enough. Best part of YT vid (above) is the reference material on what it takes to blow a given fuse --in Current & Time. An 18 minute vid, worth a watching. neil, NYC