is there a mod for this transceiver to operate on 11 meters? I've tried to do some research with no luck.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Kenwood ts-850s HF transceiver on 11 meters
- Thread starter mattsowders1989
- Start date
Yeah I saw that mod. I'm not sure if it will allow 11 meters operation or not. I guess I could give it a go. Anyone ever tried this?
It will TX anyplace it will RX. I'm pretty sure you can tune to 11 meters on that rig, so I don't see an issue.
Don't thank me, thank Captain Kilowatt
Man that one had me
. That was so long ago I didn't even remember posting it and was wondering what you were talking about.
Ok. I've got a new problem with this radio. The led screen isn't working at all. Completely black. No leaking caps or any residue of cap leakage on the led board. What else could be causing this?
BJ radionut
Supporting Member and 6m addict
There is the problem with memory batteries behind the front panel of the displays...if left in and not changed or the mod done to remote the battery...it will eat the board traces off the display board when the battery begins to leak.
http://www.aerog.com/ts850_battery.shtml
GL
All the Best
Gary
http://www.aerog.com/ts850_battery.shtml
GL
All the Best
Gary
BJ radionut
Supporting Member and 6m addict
Look carefully for any broken wires or a loose or missing cable harness plug out of place. Sounds like no power at all getting to the display.
The flat cables in that radio have a bad habit of popping out of the socket at one end.
73
73
- No one is chatting at the moment.
-
-
dxBot:63Sprint has left the room.
-
dxBot:kennyjames 0151 has left the room.
-
-