Using 38' 12THHN end fed with 9:1 unun (no counterpoise wire yet) fed with 40' of LMR-240 coax. Trying to lower noise floor for DX.
With no choke before transmitter and AGC at +10 which would be normal to hear DX stations:
160 . S8-9
80. S-9
60. S5-6
40. S4-5
20. S1-2
17. S4-5
15. S1.5
12. S1.5
10. S3.5
With MFJ 1:1 choke just before transmitter and inside shack room:
160 . S6.5
80. S-7.5
60. S3.5
40. S3
20. S0
17. S0
15. S0
12. S0
10. S0
No plans to use 160/80 as wire is way too short.
Not sure of db as I don't have reader for that.
Was suggested to check wwv for clarity and to see if signal is reduced or just noise to see if choke is choking signal or just noise.
Other tips??
With no choke before transmitter and AGC at +10 which would be normal to hear DX stations:
160 . S8-9
80. S-9
60. S5-6
40. S4-5
20. S1-2
17. S4-5
15. S1.5
12. S1.5
10. S3.5
With MFJ 1:1 choke just before transmitter and inside shack room:
160 . S6.5
80. S-7.5
60. S3.5
40. S3
20. S0
17. S0
15. S0
12. S0
10. S0
No plans to use 160/80 as wire is way too short.
Not sure of db as I don't have reader for that.
Was suggested to check wwv for clarity and to see if signal is reduced or just noise to see if choke is choking signal or just noise.
Other tips??