Hello everybody, just got another one in the mail for my collection.
A Uniden Grant XL, with hackery/butchery included at no extra cost lol.
Just like the Cobra 148 GTL, these tend to get "all hacked up". This eBay find was not spared.
Here are a few pics.
PLL Area, a repaired trace, and solder bridge are noticeable.
[photo="medium"]4374[/photo] .
Audio (By the Mic Jack)
[photo="medium"]4373[/photo] .
I see a few solder bridges, and the trashed traces.
I could fry my feeble mind attempting to interpret the schematic, and with such a common radio I think two hi-res photos would allow me to set this one straight(er) in a jiffy.
My main concern is that I will remove a factory jumper or factory solder bridge.
I can circle the trouble areas I am concerned about, if need be.
If one of you fine gents would be so kind as to snap a few photos of these areas on the circuit board I would be extremely grateful.
EDIT: Going to the usual place to look at the F.S.M. to see if transparent images of the PCB (& traces) are included or not.
Thank You, & All The Best.
-LeapFrog
A Uniden Grant XL, with hackery/butchery included at no extra cost lol.
Just like the Cobra 148 GTL, these tend to get "all hacked up". This eBay find was not spared.
Here are a few pics.
PLL Area, a repaired trace, and solder bridge are noticeable.
[photo="medium"]4374[/photo] .
Audio (By the Mic Jack)
[photo="medium"]4373[/photo] .
I see a few solder bridges, and the trashed traces.
I could fry my feeble mind attempting to interpret the schematic, and with such a common radio I think two hi-res photos would allow me to set this one straight(er) in a jiffy.
My main concern is that I will remove a factory jumper or factory solder bridge.
I can circle the trouble areas I am concerned about, if need be.
If one of you fine gents would be so kind as to snap a few photos of these areas on the circuit board I would be extremely grateful.
EDIT: Going to the usual place to look at the F.S.M. to see if transparent images of the PCB (& traces) are included or not.
Thank You, & All The Best.
-LeapFrog
Last edited: