I've got a 2995dx has no tx output rx works fine I also unhooked the amp board completely to rule.that out and hook coax from.s0239 directly to main board. I can't find any voltage info on this radio and the schematic on cb tricks uses bipolar finals so I would assume voltages would be different of there are any on that schematic. here are some voltahes i took.
Rx. Tx
Driver irf520
G.02. 3.71
D 7.72. .08?
S 0. 0
QUESTION MARK ON TX BECAUSE M.M. WON'T STBLEIZE ON THAT PIN MAKES A WEIRD NOISE
FINAL Irf520
G .07. 3.95
D 7.72 7.74
S 0 0
Voltage regulator B827
B 13.12. 12.99
C 7.72. 7.65
E 13.67. 13.66
Rx. Tx
Driver irf520
G.02. 3.71
D 7.72. .08?
S 0. 0
QUESTION MARK ON TX BECAUSE M.M. WON'T STBLEIZE ON THAT PIN MAKES A WEIRD NOISE
FINAL Irf520
G .07. 3.95
D 7.72 7.74
S 0 0
Voltage regulator B827
B 13.12. 12.99
C 7.72. 7.65
E 13.67. 13.66