Is there any real life benefits in using RG213 as jumpers between devices compared to the cheaper RG8X? I would like to order some 6ft or 9ft jumpers.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
RG8X v RG213
- Thread starter Limeybastard
- Start date
Why are you getting just 6' and 9'? Three foot cables are easier to keep un-tangled.
No,
213 is a bit stiff for jumpers if there will be bends in the coax, I use it for my long runs on HF bands. I prefer larger coax for everything including jumpers because I use solder/crimp connectors. These type connectors work well on large coax but not as good on the RG8X size.
I do use RG8 to patch between all my components because it is more flexible for the larger coax and good for jumpers.
213 is a bit stiff for jumpers if there will be bends in the coax, I use it for my long runs on HF bands. I prefer larger coax for everything including jumpers because I use solder/crimp connectors. These type connectors work well on large coax but not as good on the RG8X size.
I do use RG8 to patch between all my components because it is more flexible for the larger coax and good for jumpers.
Just thought it would help to spread the components , example have psu and amp one side of desk and radio the other side with meter.
Crap, you have a big desk......
HAHAHAAH! Man,I Laughed so loud when you said the above
Truth be told, I think I have a big desk. Its just a bloody old chest of drawers with my old clothes in em.
- No one is chatting at the moment.
-
-
dxBot:63Sprint has left the room.
-
dxBot:kennyjames 0151 has left the room.
-
-