How about running my old CD Radio Speakers (2 6" Alpines) to my CB? Can I just strip the speaker wire, and get a plug off another speaker, cut it, strip it, and mend the two together? The Alpines are 2 way speakers. Thanks for the help. The reason I want to do this is because my driver side door leaks air a lot since I was hit by a drunk driver, everything has been replaced, Jeep is back to better than is was before, besides the door leaking air, anyone have any experience with fixing the door problem?
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Speaker Question
- Thread starter stardust
- Start date
The best solution for the door problem is to get after the insurance company of the guy that hit you.THEY have to make things right with your vehicle.Hopefully you did not sign off on any claims yet.
Yeah that's the logical thing to do, if the person was insured, or even an American Citizen...no license, no job, nothing,I could have filed a suit against him, but for what? It wouldn't even had paid for the damage of my jeep, so I collected my losses and went on, didn't worry about it...totalled his car, busted grill, bumper, headliner, and driver side fender...he lost his car, has a DWI, and is serving jail time.
N
nvcowboy25
Guest
hum
not a tech as long as the impendece of the spekears are the same should be ok i think most cb are like 4 or 5 and car sperks are 4 or 8 not sure but your olny gonna be puting 4 watts in to the spker so should be ok just wire um in series to a head phone jack or3.5mm mono plug .
not a tech as long as the impendece of the spekears are the same should be ok i think most cb are like 4 or 5 and car sperks are 4 or 8 not sure but your olny gonna be puting 4 watts in to the spker so should be ok just wire um in series to a head phone jack or3.5mm mono plug .
nvcoyboy is right. The safest thing would be to run them in series. If they are 8-ohm, you can try them in parallel, but it might be a bit hard on the audio chip to drive that low a load.
Car speakers are 4 that is correct and CBs are 8 for external speaker and PA. Best to wire them in series if they are 4 to get 8 ohms.