Sidebar Sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Troubleshooting Kenwood TS-50S

A

awkirch

New Member
Jun 16, 2017
1
0
1
76
Aiken, SC
Hello, all. I just joined the dxForum. Trying to get my station back on the air after a number of relocations and false starts. Got a simple antenna up, mainly for receive only now; working on the tower. I hooked up my Kenwood TS-50S, which has been in storage for about 10 years, and which worked perfectly the last time that I used it. When applying 12vDC, I got a very loud buzz from the speaker, with the rig shut off. Tried with a 12v automotive battery to see if it was a power supply problem, but got the same noise. So, what could have deteriorated during the storage? Electrolytic caps? Where do I start? Thanks

Allen, KK4BR
 


dxChat
Help Users
  • No one is chatting at the moment.
  • @ Wildcat27:
    Hello I have a old school 2950 receives great on all modes and transmits great on AM but no transmit on SSB. Does anyone have any idea?
  • @ BJ radionut:
  • @ ButtFuzz:
    Good evening from Sunny Salem! What’s shaking?
  • dxBot:
    63Sprint has left the room.
  • dxBot:
    kennyjames 0151 has left the room.


      Top Bottom
      Back