Uniden PC78LTW mods

[maddog355]

I called the C.B. Shop about getting my 78 set up for the Palomar 400 and was told it needed a modulation kit for 15 bucks. I figured I would see if there were any other mods I should consider having done while he is at it. Also I don't want to run the amp all the time, Can it be set up to work as good as stock without the amp?

 

[BOOTY MONSTER]

get a variable dead-key , a real alignment and add a 2018 xtreme mic .

 

[9C1Driver]

Sounds like they want to sell you some repair service. Why replace the final if it's still working? Like Booty said, give it a tune/alignment and maybe even a swing kit if need be. Then you can have either a set dead key of say 2.5 watts, a hi lo dead key of say 2.5 and 6, or a variable control of 1-6 watts. Should run fine with a Palomar 4 pill.

 

[maddog355]

I think a swing mod is what he called it. Don't recall for sure. Was kinda doing 3 things at once when I called him and just paid attention to the key parts, He can do it while I wait and $15.

 

[cbradiomagazine.com]

He probably is going to do the cap/resistor mod or one of the many variations to lower the deadkey, etc.

Make sure you ask him exactly what he plans to do - what parts he's going to remove/replace, etc.

 

[BOOTY MONSTER]

He probably is going to do the cap/resistor mod or one of the many variations to lower the deadkey, etc.

Make sure you ask him exactly what he plans to do - what parts he's going to remove/replace, etc.

Cobra 29 LTD super modulation modification