Been using the bearcat 880 for years, just picked up a Stryker 94hpc.
I don't like the channel controls on top of the mic, I've also got several BC mics as I've just bought new replacements instead of fixing the old ones. I believe my old mics just have wiring issues. Since that's all, I'd like to wire them up with the RJ-45 plugs to use with the 94hpc.
Below I have the layout for both mics.
I just need to know how to match them up?
Stryker 94hpc is:
1: Blue NC
2: Red TX/UP/DWN
3: White Audio
4: Black Shield
5:NC
6:NC
7:NC
8:NC
Uniden Bearcat is:
PIN COLOR FUNCTION
1: Yellow Audio HOT
2: BLACK RX switching
3: RED TX switching
4: N/C
5: SHIELD
6: N/C
And what would be the best way to get the shield into the RJ-45 , a piece of heat shrink first?
I don't like the channel controls on top of the mic, I've also got several BC mics as I've just bought new replacements instead of fixing the old ones. I believe my old mics just have wiring issues. Since that's all, I'd like to wire them up with the RJ-45 plugs to use with the 94hpc.
Below I have the layout for both mics.
I just need to know how to match them up?
Stryker 94hpc is:
1: Blue NC
2: Red TX/UP/DWN
3: White Audio
4: Black Shield
5:NC
6:NC
7:NC
8:NC
Uniden Bearcat is:
PIN COLOR FUNCTION
1: Yellow Audio HOT
2: BLACK RX switching
3: RED TX switching
4: N/C
5: SHIELD
6: N/C
And what would be the best way to get the shield into the RJ-45 , a piece of heat shrink first?
Last edited: