This is how I found to program the Wouxun HT
After selecting item, to enter it you Must push Menu exit to save it.
1. Push theTDR, then Menu 21, Menu, Freq.
Enter Freq (146.670), (147.030), etc.
2. Menu 23, Menu set off set to 00.600 - DO NOT EVER CHANGE THIS AGAIN!!! menu, exit.
3. Menu 24, Menu set to +,- , off, Then Menu, exit.
4. Menu 16, menu select the correct tone, menu, exit.
5. Menu 27, menu select channel ##'s. If you see a CH in front of ##'s it's Full (ch002). if you see 002 it's free to use.
Menu 27, menu select channel ( 15, etc), menu, exit.
To delete channel menu 28, menu channel ## menu, exit.
Now to add names
6. Menu 21, menu select CH, menu, exit
7. Menu 26, menu rotate clock wise to select A-Z, 0-9. counter clock to move to next space. When you are done. Menu, exit.
If you pass a letter or space. YOU MUST CONTINUE FORWARD UNTIL you come back to correct one.
8. Repeat until you program your radio.
After programming your radio. To show Names
9. Menu 21, menu select Name, menu exit.
Now you are ready to fully enjoy your new toy.