Search results

I just received an order from Norm's about 2 weeks ago. I have to say the service was excellent. The communication was excellent and the packaging of my order was phenomenal. Edited: As I looked back at my invoice(attached), I received the order about 4 weeks ago. 73 David

Attached are the datasheets for the Toshiba 2SC2879 and the HG2SC2879. As you can see by comparing the 2 datasheets, HG's sheet is almost a carbon copy of the Toshiba as far as Maximum ratings and Electrical characteristics. There is additional data on the Toshiba datasheet("Input power") that...

https://www.cbtricks.com/radios/galaxy/dx11b/index.htm The above should get you real close. The board is a EPT360014B. 73 David

Dirty relay contacts. 73 David

ALINCO DMR610 DR-135 DR-435. PIN 1 MIC PIN 2 PTT PIN 3 DOWN PIN 4 UP PIN 5 +5 VOLTS PIN 6 REMOTE CONTROL PIN 7 SCREEN EARTH (ground) PIN 8 GND Mike wiring Not a combination I am familiar with but all information from the linked website above. Use at your own...

The link below should lead you in the right direction. This info is for a model 323A but there are other models on the CB Tricks site that may be a closer match to your radio. https://www.cbtricks.com/radios/ef_johnson/messenger_323a/index.htm Model 320 & 323 below...

A U.S. stocking source for IRF-520's. I have dealt with Mouser many, many times. Good service always. At the price of these, replacing all of the mosfets in the RM is a no brainer. You may want to seek out biasing options for this amplifier. (it does clean up the SSB output) I've seen several...

Here is a stocking source for IRF520's. https://www.mouser.com/ProductDetail/Vishay-Semiconductors/IRF520PBF?qs=%2FRKvNCQzLu0LFYQuStTxKg%3D%3D 73 David

Move lightning surge protector wire to the same ground rod as the mast is connected to Yes Connect the mast ground rod to the main house ground rod Yes The antenna coax goes directly into the Anytone Yes Stop here and get radio checks. All of the other items in your shack will be...

It is my understanding that not all 300A's came with a high voltage relay to cut off the tubes when the amplifier is un-keyed. I would look for a 300A that did have the high voltage relay and CORRECT matching power supply. Though if the deal is right (good tubes!) on a 300A without the high...

My AT-6666 has been running 2 years with no heat problems at all and the covers have never been removed. (So I have no idea what MOSFETS it is equipped with) But it never peaks more than 20 watts. 73 David

Maybe running a D-Rail radio?:unsure: 73 David

This is CE Distributing's "For Public Sale" site. https://www.tubesandmore.com/ Whether or not they have a 100K pot with a push/pull switch?????? 73 David

+1 on the delta tune. Useless since the 23 channel crystal days. I have picked up a few cheap (and I mean $20.00 or less) 40 channel rigs from e-bay and change the useless delta tune controls to RF Gain controls. Most are PLL02A models and usually require a mic cord repair or some other silly...

I have heard of folks that spend nearly a thousand dollars for a CB radio-add all the "Hot Rod" goodies the "Golden Screwdriver" puts into it and the price can be over 2 thousand dollars! Are they Rich? Maybe? Priority Driven? Could be....... 73 David

:giggle: 73 David

999, Thanks. I got the answer I figured I would get........ "most operators don't care" 73 David

The question is not what it does ON 6 meters but what does the spurious radiation do TO 6 meters. Maybe just a rhetorical question because most operators don't care. 73 David

But what does it do to 6 meters? 73 David

I noticed the audio generator setting at 100mV PP at the 2:45 mark in the video. I normally use 30mV. Maybe if I used 100mV my 148GTL would output 300 watts?:unsure::ROFLMAO: 73 David