Search results

$29.95 and out the door?

Yes even with the 3k dollar units you must calibrate after every change in a configuration of coax, baluns, connectors etc just the way it is until they come out with something even smarter.

I have a Bird SiteHawk 6000 so I'm looking for a toolbox analyzer and have one of these like you just ordered to keep in my field toolbox. Here is a Man Captain that has done 5 or 6 videos on these I watch all his posts.

I have around 150 units on the back burner and about 27 in the shop 2 weeks ago I had 44 units on the shelf and some of those back burners may send it somewhere else but there will be 50 in their place so it is just the way it is.

You mean All is fair in love and RF!

One day Andy One day.

You may consider doing a counter alignment the procedure is in the service manual.

If you use the clarifier and set the receiver to read 27.2045 and then transmit does it show the same as the receive setting it should? It should also show the same offset on all channels. The frequency should also show the same transmit frequency on an external counter as it shows on the Cobras...

Does this unit have the clarifier locked for receive and transmit or does it only control the receive?

I could be somebody's misguided attempt to control "HUM, FEEDBACK, RF FEEDBACK ???" Usually, these kinds of changes are not based on knowledge, and don't hesitate to start with a clean slate and just put it back the way the factory designed it. Then you can start over if you have any knowledge...

HUH? The only way you can ever have 3 or more radios on SSB enjoying a solid communications roundtable is if they are all capable of shifting both rec. And Tx freq. at the same time. The only thing that would not make that true would be the clarifiers somehow not done correctly.

It was simply a bridge rectifier inside a black shell it increased the plate voltages which increased power.

I must concur with Mohave in the context " I could be wrong and have been before" but that does not mean you can just ignore suggestions from those of us that have lived in this realm First I have installed and set up more than my share of 5 to 15K mobile systems and when I suggest that maybe...

This reminds me of what my Dad said when I came home with a brand new Boss 429 He took his pipe out of his mouth he said rev that thing up again so took it up to about 4 grand and let settle down he looked at me and "WHAT THE HELL DO YOU NEED WITH THAT MUCH POWER". I said the same reason you...

Maybe you are experiencing something completely different like harmonics that are rampant this would make it impossible. Are testing with just the radio or at high power Try? Try running coax direct from the radio to the antenna or use an analyzer and short length of coax and maybe you will see...

Well, I walked in took the test for Tech. Walked out with my license and never once studied for it. So on a dare, I'm going to take the General the same way and see what happens. The difference is I have been repairing ham gear and other radios for 50 years I don't remember ever asking anyone a...

Well, Customer picked up today after repairs to antenna switching board and Mars conversion. These are monsters 72lb's. He also wanted it freshened up a bit so the bezel and cabinet were given a fresh new look, It is quite the machine made contacts on 6 meters and 10 meters.

YOU GET THAT #@$%$#@ MESS!!!! STRAIGHTENED OUT RIGHT NOW...... SON! Don't show your face at the dinner table till it's done, And I mean done right. Words of wisdom from my Dad. LOL.

Well it don't have SSB But could make a good road trip radio in my F150 would you consider 200.00?

Who is "ica"?