• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

Search results

  1. mechanic

    Looking for Advice and some help too!

    Looks to be a good receiver but is limited on HF frequencies as it covers mostly short wave broadcasters and has gaps in band coverage. A favorite of mine is the Tecsun PL-660 and a newer version will be out, the PL-670 soon. These cover the whole of HF, 100 kHz to 30 mHz and have USB and LSB...
  2. mechanic

    Listening on 11 meters....

    Tuning around on the 11 meter band and below, I found some interesting comms on 25.750 in AM mode. At first I thought it may be DEA or ICE but listening for a short it seems to be deer hunters. Talking about pursuit and having gun on the ready, you can see my confusion! Sort of a Texas drawl on...
  3. mechanic

    Direct TV Box Reboots

    Try using a different transceiver, this will let you know where the fault is originating. If the DTV box still acts up, then the TR7 is not the problem. Then it would be the coax, antenna or DTV box. I have Dish Network and have zero problems, only item in my home that overloads from RF...
  4. mechanic

    SW number station

    Sounds like a SelCal jammer on top of Cuba's usual number station.... 73 mechanic
  5. mechanic

    Looking for Advice and some help too!

    I could not find any such receiver on Amazon but a good antenna would bean outside wire, horizontal. I have one that is about 60 feet long, three to five feet above the ground. I hear most anything. 73 mechanic
  6. mechanic

    What size Power Supply ?

    I run several different powers supplies, my main is a homebrew 35 amp continuous with heavy cables. Works well with my 100 watt rigs. I also have a decent but cheap Samlex 20 amp but I renewed the rectifier diodes when it was still fairly new. I use a 12 amp with my HR2510, a no name brand...
  7. mechanic

    Need Circuit For Simple Jammer "Bush Boogie"

    There was one of these in our area once, would jam and play music on top of us. He was hit one night by axing his coax. Back on the air in three days with a new rig and his coax in a pipe! Out came the grappling hook and down with the tower! He finally quit when he caught wind of the tar and...
  8. mechanic

    My AR3500 100Watt Radio

    If you do not mind my asking, what did this cost you? I have one I would like serviced.... 73 mechanic
  9. mechanic

    Help with Neighbor Interference

    Finding RFI sources can be tough. The offending emitter may not be at your neighbor's house. Best way would be to DF (direction find) the noise source with a portable receiver, a short wave receiver will work fine. The closer you get the stronger the signal will be. If it is power line...
  10. mechanic

    ODD LOOKING D104 AMP BOARD

    Late on this reply.... Several transceivers did not have an amp board installed. My Yaesu FT-101EE and my old Hygain 623s are examples. These rigs have vacuum tube (valves) for finals and do not need or want the amplification by design. You could use a D104 with the amp on these rigs but...
  11. mechanic

    sweep tube box chatter.

    Not sure if this is on topic or not but I am looking for a simple DIY build of a sweep tube amp. An old friend of mine had a home brew single sweep tube amp that gave him about 25 to 30 watts out. I'll build a small one at first, then on to bigger things! Any guide to a good direction...
  12. mechanic

    New Cb Band?

    Citizens Broadband? is that not the same as splatter? 73 mechanic
  13. mechanic

    2 CBers canned in one week. $14,000 and $22,000 fines.

    And I thot CB was for communicating!? Now there are these amps and cutting limiters.... 73 mechanic
  14. mechanic

    0 Ohm resistor

    Just for the point of argument.... Yes a zero ohm resistor is the same as a wire jumper but then again it is not! Depending on the circuit used, a zero ohm resistor is used by design because a resistor can introduce other factors such as capacitance and inductance also to reduce 'noise' in...
  15. mechanic

    Anybody Know This Noise? Sunrise Times, Ch 14

    IMD is most likely correct as 'skip' brings in all sorts of signals. When the cycle is high and conditions are good, one can hear all sorts of UTE signals including OTHR or Over The Horizon Radar. I hear this rapid and loud pulsing on many frequencies. Another is radiosonds or travelling 'pips'...
  16. mechanic

    Cobra 142gtl LEDMod

    Ebay is the place, you can buy blue common anode displays for about 8 dollars.... 73 mechanic
  17. mechanic

    Cb channels empty for the most part.

    May as well throw my 2 cents in.... Pretty quiet around here now, I have to call up on the phone to get the few old timers on the channels! Few truckers moving through with a couple of French-Canadians going across the U.P., truck drivers saving a few miles. I remember my dad's CB in the...
  18. mechanic

    maxlog M8900

    In the past week I have worked several stations from South America, Brazil and Chile, Quite a few in North America, all on ten meter. Good reports with the 8900! Still only listening on 12 meter as I have no antenna for that band but on my various wire and beams , sounds pretty good. Like...
  19. mechanic

    FOR SALE President Grant 2 mint near new

    Hi Retro.... What you wanted at the last would be fine with me. I'm in Michigan BTW, the U.P. eh! 73 mechanic
  20. mechanic

    FOR SALE President Grant 2 mint near new

    Jim, I meant to type Grant and not Lincoln! So if you still have the Grant, I'm interested.... 73 Mechanic