Search results

No TX on CW only SSB and I used 1000 hz tone radio does 60 watts DK with 140 pep . In the radio the hf pot is set to protect the amp. It fun do :).BJ radionut thank you again

Radio do not tx on AM,CW,FM only TX ON SSB USB/LSB. WHEN THE PTT ON AM ERROR

ok here we go, amp is conneted to the dummy load, on 10M. radio on ssb(rf pwr knob at 2:00 oclock) with 60 watts pep just talking ,making sure the signal passes:) the amp,now that the amp is on I see about 180-200 watts on MTA-20 meter from the radio shack and when I pushed the proc key on I...

BJ radio nut now I know why you like that radio . Because it has 6 meters on it

BJ radio nut .Thank you for the help I keep post it the result .I love that radio .like new the coolant fan is clean

Not really you can ask tecnicoloco I did dx. With the radio only about 2k milles

How about ARB-702 to the radio where I connected and the internal relay on the radio on/off position thank you

1st time playing with fire .I hope you can help me on this experience. The amp has 3 new bulb A811a and wend i turn on. I have 1.8 plate voltage on STBY. Thank you in advance.Also I need to know is the ARb-702 box run with 9-12 volts .o if I used de grey cable only with pin 2 ground,pin 4 red ...

the code is 1984129 it work for me. ssb (usb/lsb) ok but no Am,cw,and fm. on AM tx ERROR

So I want to ask you about dip meter kit for?

Loose cannon I am and trouble my wife is not happy.i did not bring any baby clothes at all.:D

I stopped by today on a garage sale and I found some ham radio treasure from ft-920, al811, low pass filters, Alonzo dr140t, microphones, whole different bands/antennas, balun kits, amp tubes, antenna rotors, antenna books cubical quad arrr antenna books from 1974, and more. tomorrow I will...

This is my antenna

The cobra 148gtl does 3 watts dk on AM and about 16 to 18 peak.On SSB it does about 18 watts the palomar has driver SRF7000-90 pushing 4 pills SRF 3749 motorola The boomer has driver MRF455 pushing 4 pills SRF 3749 motorola

I just received and tested this heater and I would like to know if this is average wattages. They seem to work okay, the Palomar needs a fix though. Thanks for the comments.

Thank you DoctorAudio, I decided to go for the 470. Images below.With 3 watts DK input does about 125 DK on AM on SSB do not know I hope over 200 pep

Can you help if this resistor o with the schematic thank you in advance

Mmmm I have to check R194 thanx nomadradio

it does not have marks for the tuning stub. you right it must be cushcraft ringo

I am working on galaxy 949 dx right now and i can hear the tone on AM only not on SSB It thas right?