• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • Click here to find out how to win free radios from Retevis!

Search results

  1. C

    If you had to pick a 40 SSB CB BASE purely on asthetics what would you choose?

    I like the look of the ARF 2000 but wasn’t a good talker just looked cool.
  2. C

    RCI 2995DXCF alignment procedure questions

    I am looking at the alignment procedure I attached. and have a few questions. I’m only checking and not making any adjustments at this time till I can clarify a few procedures. 6.1.1 PLL Alignment 1) USB & LSB OSC Set radio to USB TX mode. Mod off. Connect Frequency Counter to TP5 (is an...
  3. C

    RANGER RCI 2995DXCF SSB Power issue

    Thanks I will check that, I had the microphone gain all the way down and tried also I will look at VvR7
  4. C

    RANGER RCI 2995DXCF SSB Power issue

    AM is working perfect but on LSB & USB if I have the RF Power more than 25% when I key I’m seeing a full carrier? Receive sounds good on both LSB and USB. Drew
  5. C

    RANGER 2955DXCF strange issue

    My bad fat finger syndrome 2995 is correct.
  6. C

    RANGER 2955DXCF strange issue

    OK this is a strange one, let’s start with it is a bit off frequency on SSB but spot on in AM & FM that’s not the weird issue. when the radio is cold and keyed up at say 10 watts AM I not see a frequency read out on an external counter or scope but when I turn up power to say 30 watts it starts...
  7. C

    Looking for Ranger E-chip

    I have one floating around somewhere I will need to look for it but I’m away till Oct 1st. If you still need it Then let me know I will take $30 shipped or a trade for something? Drew
  8. C

    Brand new 1977 hooker 100 for sale

    Looking at bottom of amp it looks stud mounted
  9. C

    COBRA 2000 GLT SQUELCH POT REPLACEMENT

    Great thanks, I actually had that in my cart. Appreciate it!
  10. C

    COBRA 2000 GLT SQUELCH POT REPLACEMENT

    Anyone know a part number and where I can get a replacement squelch potentiometer? Drew
  11. C

    COBRA 2000 GTL well I thought I was moving along?

    well D52 was NO GOOD, replaced with one from a spare chassis and it’s now working just need to align frequency counter to radio frequency now
  12. C

    COBRA 2000 GTL well I thought I was moving along?

    Correct
  13. C

    COBRA 2000 GTL well I thought I was moving along?

    So I removed the channel mod and Roger beep, good news is radio works kind of. Not So good news: Set up 1) voice locks centered no modulation. 2) Frequency Counter and Oscilloscope 3) Dummy load and watt meter. Seeing: 1) CH1 RX radio frequency counter 26.9654, TX 26.9462 2) CH40 RX radio...
  14. C

    PLL Question

    yup the trace is cut! Will try to get it jumped later, time to go drink a few cold ones!
  15. C

    PLL Question

    That board was hooked to the mic jack so I’m guessing it’s some type of audio mod.
  16. C

    PLL Question

    It was modded for extra channels but I took the mod out and I’m getting weird frequencies now. this is the board that was removed.
  17. C

    PLL Question

    If a Cobra 2000 GTL has a MB8719 would it work as a stock no channel mod radio?
  18. C

    WTB: Cobra 2000 gtl channel selector

    Ya I was thinking of giving that a shot I did a few D201A channel selectors in the past. I agree attention to placement and detail is key!
  19. C

    Cobra 2000 GTL no 7.800 MHz at TP3

    Bob, yes I was testing in USB. I ended up following the synthesizer alignment as this radio seems to have had a lot of fingers inside. The one issue I’m having is when following the alignment I can’t use channel 1 or 19 they aren't on frequency so I was using channel 2 and 13 and following the...
  20. C

    WTB: Cobra 2000 gtl channel selector

    I’m looking for a good channel selector for cobra 2000 gtl. Drew
Top Bottom