Search results

Hey, Thank you for the tip. Any ideas for sealing the feed point from bad weather please? I hear 108LA019 and 108SD030, Leigh Anne & Ean, almost daily even though they're about 200 miles north when I point my beam over the North Pole. They're a big station like 26AT030, 26AT015, 26EK023...

Hello guys, I've just put a 2 element shortboom Yagi up yesterday for testing purposes and I'm happy with it. I plan on pulling it down in a day or two to waterproof the feed point, joints, gamma match, etc'. Weather here in Scotland (UK) is pretty bad for 3/4 of the year, so I need to make...

I have a Superstar 3900 (EPT360015C board) here that tracks fine on both TX and RX, but when the clarifier is set to 12 o' clock & in the detent, I'm 100Hz high on frequency when transmitting. Can someone advise what needs altering to move the TX frequency 100Hz down while in the detent?

I've got a tree about 20 feet away from my shack, and the tree is about 18 feet high, so I think I'll construct an 1/2 wave dipole and string it from the top of the tree to the shack horizontally. So, do you think the dipole like this will probably outsmart the vertical for DX?

What do you guys reckon are best for DX, and does higher mean better or is it irrelevant? Also, is it woruth trying a standard 1/2 wave Dipole?

When DXing on 27.555, I'm finding that some people only 20 to 30 miles away are hearing continental stations but I'm often not hearing a thing. They can be hearing them at S9, yet they're in the noise for me, nothing at all, or maybe S3. Is this normal? I'm using a Sirio 2008 and doing as good...

This also happens when using a dummy load, so I think it's a design error or something. It doesn't affect operation in any way; it's just a bit odd.

When keying off, even though the preamp' isn't activated on my KL505, The preamp indicator LED will momentarily light up. I think it also does this when initially keying, too. Has anybody else got a RM KL505 that exhibits this?

I've had a K-PO DX5000 for a few years now, and out of all my rigs, this is the only one that seems to have audio issues when connected to an amp' (RM KL203). There are a few people here in the UK that have reported this audio issue; the general consensus is that they're poorly screened &...

Hi Gary, I have the ATU turned off while doing this, so the SWR meter on this is definitely off by a fair bit. My RF gain doesn't seem to work as a squelch in FM mode; it only squelches "any signal" only when wound fully counter clockwise and at no other position.

I've just bought a new TS-590SG, however, I have a few concerns & wonder if it's faulty. When in FM mode, I've found that the RF gain knob fails to do anything at all in terms of attenuating the signal. It completely cuts the signal totally, though, only when fully CCW. The RF gain functions...

With Yaesu, I'm led to believe the 1st number denotes the final year of manufacture, and the 2nd letter denotes the month of manufacture. This is all well & good for a rig that's only been in production for under a decade, but as the FT-857D has been in production since circa 2002 (I think)...

They're on a couple of UK websites, but one of the main sellers is Martin Lynch & Sons - https://www.hamradio.co.uk/amateur-radio-base-station-radio-kenwood-base-station-radio/kenwood/kenwood-ts-480sat-pd-2307.php

There's new ones listed here in the UK at Kenyon's of Cheshire, & Martin Lynch & Son's.

I would suggest the TS-480SAT is still in production, because I've just bought a new one with a serial number of C1510032. This serial number suggests it was made in May 2021.

I was led to believe that these were discontinued circa 2019, however, this one I have bought has a serial number of C1510032 - suggesting it was made in April 2021. Anyone know if Kenwood have now started a re-run of these, or if they're just letting them go in drips n drabs?

I later found out that these filters I thought were only for RX also apply to TX, too.

It could've even been an oxidized jack socket that was the initial problem. I've had to replace a good few that have developed tarnished contacts over the years. Now that you've inserted a jack with your 8R speaker, try re-inserting your 4R speaker jack as the problem may have gone; IE -...

They're great, aren't they? Theyre a little powerhouse. I particularly like the DNR function, and have now got used to that tiny delay. Took some getting used to the huge menu, but after a couple of days they're easy enough to fathom out. What mic' are you using on yours, & do you know if the...

I ended up getting the 891 & really like it. Not too keen on the MH-31 stock microphone, though. Anyone know of a decent alternative hand or desk mic that works well with these rigs?