1st off my Tech class licence test is set for nov 2nd my general is set for a month later this is due to paydays
3rd to every on here that has given me answers to my questions
THANK YOU ALL !!!!!
i recently purchased a Kenwood Ts120S HF SSB rig for 140$ it seems to work fine of course i cannot test xmit but receives fantastic on my random wire have heard maritime mobile radio SSB on 40M and cw on several diff bands 80,40 and 15 Meters so barring any finals issues ill be on the air soon
now for the caveat
i have been reading everything on 1/2 wave dipoles i can my lot size is very limited so i chose to do a resonant dipole starting at 40 meters using 2nd,3rd and 4th harmonics to give me 20M,15M and 10M and deal with 80 meters later
so i got a Rhone 40 tower given to me that put me 30 ft above my roof line the length of my house is 56'
the supports at each end of my house are 8' tall giving me 12 extra feet so 56'+12'=68'/2=34'
on each side
so for 20M 16' each 15M 11' each and 10M 8' each
they all resonate amongst themselves due to 2nd 3rd and 4th Harmonics except for the 15 M which is stand alone
oh and did i mention its all RG-6 75ohm coax 18ga copper center conductor and copper braid (not aluminum)
are my calculations wrong ? did i miss something?am i way off base ?
i believe a choke on the feed line will help reduce voltage on the outer casing
any input is appreciated
THX CWV
3rd to every on here that has given me answers to my questions
THANK YOU ALL !!!!!
i recently purchased a Kenwood Ts120S HF SSB rig for 140$ it seems to work fine of course i cannot test xmit but receives fantastic on my random wire have heard maritime mobile radio SSB on 40M and cw on several diff bands 80,40 and 15 Meters so barring any finals issues ill be on the air soon
now for the caveat
i have been reading everything on 1/2 wave dipoles i can my lot size is very limited so i chose to do a resonant dipole starting at 40 meters using 2nd,3rd and 4th harmonics to give me 20M,15M and 10M and deal with 80 meters later
so i got a Rhone 40 tower given to me that put me 30 ft above my roof line the length of my house is 56'
the supports at each end of my house are 8' tall giving me 12 extra feet so 56'+12'=68'/2=34'
on each side
so for 20M 16' each 15M 11' each and 10M 8' each
they all resonate amongst themselves due to 2nd 3rd and 4th Harmonics except for the 15 M which is stand alone
oh and did i mention its all RG-6 75ohm coax 18ga copper center conductor and copper braid (not aluminum)
are my calculations wrong ? did i miss something?am i way off base ?
i believe a choke on the feed line will help reduce voltage on the outer casing
any input is appreciated
THX CWV
Last edited: