It is happening. And it will be available soon, along with new firmware to support it.
73
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Anytone At-6666 Pro
- Thread starter Eldorado828
- Start date
73
Hi all,
I have just posted an update on a new AT-6666 PRO firmware update, PC Alignment (service mode) tool, and PC software here:
www.worldwidedx.com
73,
Pez
I have just posted an update on a new AT-6666 PRO firmware update, PC Alignment (service mode) tool, and PC software here:
AT-6666 PRO Update! Firmware + PC Alignment tool + PC Software
Hello all, AnyTone will be adding a new a new radio firmware update V1.01, a new PC Alignment (service mode) software tool V1.02, and new PC Programming software V2.05 for the AT-6666 PRO, on their website soon. This will all be available at https://www.anytone.net/download PC Alignment...
73,
Pez
Hello!
I'm new to the forum, I just bought an ATQ6PRO radio. I made a cooling fan with control. I did not drill the radio anywhere, if necessary, the fan can be removed. I set the control so that approx. 37C heatsink temperature with this solution.
The controller is very simple and cheap.
I hope I was able to add value to this community.
Sorry for the bad English, Google translator was my friend.
)
Greetings: Csaba from Hungary
I'm new to the forum, I just bought an ATQ6PRO radio. I made a cooling fan with control. I did not drill the radio anywhere, if necessary, the fan can be removed. I set the control so that approx. 37C heatsink temperature with this solution.
The controller is very simple and cheap.
I hope I was able to add value to this community.
Sorry for the bad English, Google translator was my friend.
)Greetings: Csaba from Hungary
Attachments
Hopefully one of the 3d printer guys will make an add on fan kit for these radios. I'd buy one for sure.
yes..along with side rail / handles. I seen someone that changed their main channel tuning knob to a slightly larger 3d version. Looked pretty decent.
Does anyone know when the pro will be sold with the new firmware already loaded ? Its looking like a few months here before i will be ordering mine so just curious. Thx!
So it's said the the newest batch of the qt80 are now available with the new firmware and the q6 currently offered by Scott's does as well.
That being said, it is pretty easy and straight forward to flash if you get/have a radio with the older firmware. BTW, the QT80 & Q6pro Firmware is slightly different (display name).
What do you mean by "display name"? The name shown in the QXCodePro3 firmware tool, or something else?
Last edited:
Yeah, except these AT-6666 PRO / QT-80 radio's don't have a power up display at all.
(The AT-5555N2 and QT60 / PRO have the configurable display text, but that is programmed with the PC software, and is not stored in the firmware either).
Hello!
I would like to try an amplified dynamic microphone with the Q6PRO radio. My question is, how can I connect the PTT wire directly to Gnd? Or do you need resistance?
Tnx!
I would like to try an amplified dynamic microphone with the Q6PRO radio. My question is, how can I connect the PTT wire directly to Gnd? Or do you need resistance?
Tnx!