I am pretty sure that Cherry Popper Chris is making the Dave Made Mobi amps. They are decent amps for what you pay. I applaud anyone that makes CB amps in this day and age; it's kind of a lost art. I guess it beats heavy lifting.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Dave Made Choice
- Thread starter BBB
- Start date
I remember stories like that . . . how-did-I-wind-up-in-Belize-mornings?
Or that everyone on the jail staff knows an awful lot about you. The smiles aren’t at all malicious. Ah, more like neighborly . . .
Last edited:
That was a great time 543. I'm still kicking. Been playing radio again. Got a nice bench all set up. Told Peak I need to head to Tejas for a visit again soon !
HEY STD, hope your doing well also. I am in NC now, Raleigh area. The red suburban w 2 20s still at the shop , still in the "family" so to speak . I will tell Dave you said wassup, I will see him after new year. I need his VNA to build an antenna for the house here.
If we meet at shop I promise we do a Genos/Pats run one night ..
Happy new year brother !!
http://rfjunk.com/DC-CABINETS_c_42.html
Chris has a website where he sells RF parts. You can also buy the new Davemade NJ cabinets
I like those cases.
Just ordered a M80 2x hg2290 because I could not resist. Just hope under the hood looks as good as the outside.
Just ordered a M80 2x hg2290 because I could not resist. Just hope under the hood looks as good as the outside.
I hope it performs as you want to and im eager to see how you like it. Im not a fan of hg. Its hard for me to buy a quality build with the lower quality transistors now
Im shying away from pill amps but found a soft spot for the no name 4 pill yesterday. I needed a back up/alternate amp so I can swap off every couple months or whatever. Otherwise for mo powah im leaning towards something with a russian steel tube in it. More bang for the buck I believe.
I will take some pictures of the outside and inside once I get my paws on it, and post them on this thread.
Afternoon Everyone, looking for some help, anyone know the size of the screws used for the M400 cases, left a message on the Mobi site as well but giving a shot here, regular CB radio cover screws fit but head is a bit small.. 73s all be safe you and your families.
The radio case screws have a metric 3mm shaft and a thread pitch of 0.1 mm. Radios are all made in "metric" countries now, although they refer to it as "ISO".
The amplifier's cover probably needs american size #6 with a 32 turn-per-inch thread. Commonly referred to as "6-32", as in six dash thirty two.
And no, it's not "six thirty-seconds".
If that's too big, the next likely size down is #4-40.
Both of these should show up at a local hardware store.
73
The amplifier's cover probably needs american size #6 with a 32 turn-per-inch thread. Commonly referred to as "6-32", as in six dash thirty two.
And no, it's not "six thirty-seconds".
If that's too big, the next likely size down is #4-40.
Both of these should show up at a local hardware store.
73
Lately ive been bringing my gear right to ace and ratfukin their screw department so i know i have the right stuff