NPC Mod For Stryker 497 HPC v2

[Rc123]

Has anyone figured out a Npc mod for the version 2 (newer) Stryker 497 HPC? Thanks

 

[Greg T]

Not meant to be confrontational, but for the life of me I can not imagine why someone would do this to a Stryker. The Stryker radios are capable of over-swing, or over- mod via a couple of simple adjustments. I may be old school, but I just don't get the idea that a radio needs to be butchered.

 

[sp5it]

Provide schematic, I'll tell you how.

 

[Eldorado828]

That specific radio can already swing the gates of hell with just a potentiometer that's already in it.

The 447hpc2 is the same way!

 

[TheRealPorkchop]

Has anyone figured out a Npc mod for the version 2 (newer) Stryker 497 HPC? Thanks

Crude but effective. From that SMD cap to the center leg of the TIP36C. Use your flavor of resistor/diode... enjoy.

 

[trentduncan60]

Does anyone have a pic of where to put the npc mod on a stryker sr497hp thats 9 yrs old & has the tan board w a 2290 in it? Any help greatly appreciated

 

[trentduncan60]

Provide schematic, I'll tell you how.

 

[Eldorado828]

Does anyone have a pic of where to put the npc mod on a stryker sr497hp thats 9 yrs old & has the tan board w a 2290 in it? Any help greatly appreciated

You might pitch that question in a new thread and see how it goes. This thread is on the 447hpc2 which is a different animal all together.

Just saying, it may get better replies.

 

[sp5it]

Too small piece. Attach whole schematic here.

 

[trentduncan60]

here she is